Forhjul beskytter rem Haul loop

Front mudguard strap to help you lift the motorcycle.

Front mudguard straps are essential gear for extreme enduro events. The unique design of Kriega is a self-supporting/semi-rigid solution that is always easy to find and use.

There are 2 methods for mounting the front transport loop. Both use 2 H-Duty cable ties:
Unfasten the strap on the stainless steel loops. Wrap the strap around the fork leg, directly under the lower triple clamp. Re-thread the stainless steel loops (making sure to pull the strap through the loop to "lock" it). The free end can be placed under the supplied elastic loop. To prevent the transport loop from sliding down the fork legs, you need to use a cable tie in two ways. The first method involves passing the cable tie through the small web loop next to the stainless steel loop. Connect the cable tie and tighten it around the fork leg just above the lower triple clamp (this method is illustrated on the page 'Haul Loop'). Another method involves using 2 x cable ties connected together in an eight behind the front light/plastic number (this method is indicated on this page). The eight figure method is superior, as you can refine the angle of the transport loop by shortening the length of the cable ties. The shorter the tie, the higher the transport loop will be (see the Works series video).
TECHNICAL SPECIFICATIONS

Semi-rigid design
Universal fit (front only)
Ultra-durable construction
HYPALON: abrasion-resistant reinforcement
TOUGHTEK - grips wet or dry
Alloy loops

WEIGHT
70g